Hi Team,
We planned to upgrade Enterprise Portal from 7.01 to 7.4.
We have 40 Development customized components. We are aware of moving them
to throughout the landscape. But we are not aware of where exactly we
need to do these customized components during the upgrade. Its like
before upgrade , or in between or after the upgrade.
Normally for 40 development components how much time it might take. appreciate your help in advance,
Thank you
Regards
Raghu
Dear All,
We have recently upgraded our EP portal from 7.01 to 7.4, and also we
have BI Portal which is running on 7.3.
Previously BI Portal act as Producer and EP Portal as a Consumer, now
while reconfiguring Federated portal I am getting below error.
“If the remote system is the same SAP NetWeaver release as your system,
then a two-way registration is performed.
If the remote system is a lower SAP NetWeaver release, then a one-way
registration of your system as a consumer of the remote system
(producer) is performed
Could not retrieve registration information from remote system; check
that the remote system is running and can be accessed.Unexpected error
occurred. Check your configuration settings and network connection, and
then try again.
Could not register FPN connection "PU1"Unexpected error occurred. Check
your configuration settings and network connection, and then try again”
If I try to register same with EP portal it successful registered, but
it won’t show previously assigned role of BI portal users, if I
manually assign than it shows but after deregister and reconfigure it
again it delete producer Portal role in consumer Portal users, we have to re assign role every time
after system refresh which is not possible for more than 2000 users.
Kindly advice how to resolve this.
Thanks & Regards,
Hi,
I am starting this post to get benefit on the Netweaver upgrades discussion. In our organization, we are working on Proof of concept for Netweaver portal upgrade to 740 release.
I am working on building a POC system with our Quality portal java system copy and then upgrading it to latest NW 740 SP11 release.
Current environment = SAP EHP 3 for SAP Netweaver 7.0 (NW 7.02, SP15)
Could someone help me here with the upgrade documentation and steps to be considered before going into the upgrade?
I am exploring on the preparation work, but it will be helpful if someone who has upgraded their portal to 7.4 can share their experience and tips during the upgrade?
Also would like to know if there will be any dependency on migrating the ESS, MSS components which off 600 release to NW 7.4 portal environment?
Do we need to consider any prerequisite for these components during this upgrade?
Really appreciate sharing your experience and knowledge on this.
Thanks,
Prasanna
Hello,
i hope i've found the right forum for my question.
could anyone tell me how i could check if the sap r/3 enterprise system / bw-system is unicode or non-unicode?
hope someone can help me.
best regards
guenter
Hello,
During a system copy (import) withSWPM 1.0 SP08 PL3, the processis blockedin step"InstallJavaengine"> Extracting lib/util/xml/SDMxml.jar.
I tried withseveralversion of Javabut I still havethe same problem :
j2sdk-1_4_2_17
jdk-1_5_0_12
jdk-7u79
I deletedthis fileand restartedSWPM->Sameproblem
There areno errors inthe log files.
The system is Netweaver 7.00
Do you have an idea?
Thank you
Cédric
Hi All,
Greetings.
I am looking an overview of triggering SAP Web service from website ( HTML page ) and let say an example for triggering quotation data from third party to SAP.
Here i have created a Remote Function module and created web service as well. I couldn't able to figure out how can i utilize the web service from SAP to front end.
Thanks,
Prabh
Hi Experts,
We have upgraded Portal from NW 7.0 to 7.4 ,now facing a Portal Runtime error when opening the iView Personalization window.
Getting the below error in the logs
Lookup failed for gwd: gwd:/tc~pp~iview_per
[EXCEPTION]
javax.naming.NameNotFoundException: Lookup failed for gwd:
at com.sap.portal.pcm.extension.jndi.ContextImpl.lookup(ContextImpl.java:224)
at com.sap.portal.pcm.extension.jndi.GenericContext.lookup(GenericContext.java:100)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at com.sap.portal.gpal.api.GpalContentCreatorService.syncDC(GpalContentCreatorService.java:565)
at com.sap.portal.gpal.api.GpalContentCreatorService.syncDC(GpalContentCreatorService.java:449)
at com.sap.portal.gpal.api.GpalContentCreatorService.syncPCDObject(GpalContentCreatorService.java:117)
Appreciate any helpful inputs to resolve the same,its kind of urgent too.
Thanks
Priya
Hi, I am currently performing an Portal Upgrade from NW 7.0 to NW 7.4, and am stuck at Configuration phase
Its asking me to insert the DVD Type NW_JAVA, Desciption is NW Java Content DVD.
And below that its asking CD Type as J2EE-CD,J2EE-INST,JDMP.
Am I am not able to figure out which DVD needs to be given for the same.
Can someone help regarding the same?
DVD Required
Regards,
Lokent
Hi,
I have a problem with a section of code, whch I am unable to resolve either the change from version 7.0 to 7.3 or the code needs adjusting.
| SearchProperty[] PropFromSessionTemp=new SearchProperty[ctx.getSearchProperties().length+1]; | ||||||||||
| SearchProperty newProp=new SearchProperty(); | ||||||||||
| newProp.IPropertyName = "{http://sap.com/xmlns/cm/}TestProperty"; | ||||||||||
| newProp.operator = IQueryEntry.PROPERTY_OPERATOR_EQUAL; | ||||||||||
| >>newProp.propertyType = PropertyType.STRING;<< | ||||||||||
| newProp.value1="Form"; | ||||||||||
| PropFromSessionTemp[0]=newProp; |
If anyone could help as the line causing a problem is in BOLD and marked with <<, then this would be very useful and I would be grateful. I am sure it something simple, which needs changing.
Thanks
Hi Experts,
Please provide information on the post upgrade activities to be completed apart from upgrade guide contents .
Source-->Sap NetWeaver EP 6.40 Backed application used is ESS and MSS
Target--->Sap Netweaver 7 EHP2
And do we require to update license key after the upgrade from Sap netweaver 6.40 to Netweaver 7 EHP2 as this is not mentioned as a part of follow activities...
So please provide the best practices doc for post upgrade steps to be carried out from both Basis and EP Perquisite
Thanks,
Avinash
Hi SAP experts,
i'm trying to upgrade our NW7.0 EP to NW7.3. Portal is running on WIndows 2008 R2 and MSSQL 2008, JVM6 patch 34. Downtime phase has failed with strange error:
Error while processing migration list P:\upg\java\data\mig\MIGRATIONAUSF.LST. Could not migrate some archives from migration list. Error during migration of archive P:\upg\java\data\mig\DEPLOYARCHIVES\icm_migration.sda which has been extracted to directory P:\upg\java\migtool\icm_migration. Could not execute MTI process. See log files P:\upg\java\log\JMT_FRAMEWORK_RDM_03.OUT and P:\upg\java\log\JMT_FRAMEWORK_RDM_03.ERR. Return code condition success evaluated to false for process java.exe for action RUN_MTI.
<<<<<<<<<<<<<<<<JMT_FRAMEWORK_RDM_03.OUT >>>>>>>>>>>>>>>>>>
#2.0#2011 11 25 17:10:04:811#+00#Error#com.sap.sdt.jmt.migrationtool.err#
###C000C0A8C01D00000000000677B5C22F###com.sap.sdt.jmt.migrationtool.err########Thread[main,5,main]#Plain##
com.sap.sdt.jmt.MigrationException: <Localization failed: ResourceBundle='com.sap.sdt.jmt.MigrationToolResourceBundle', ID='icm.id002', Arguments: ['cluster_data/server/ID4392653/services']> : Can't find resource for bundle java.util.PropertyResourceBundle, key icm.id002
at com.sap.sdt.migration.icm.ICMDataController.migrateEngineData(ICMDataController.java:273)
at com.sap.sdt.jmt.mc.EngineDataMigrationExecuter.executeController(EngineDataMigrationExecuter.java:70)
at com.sap.sdt.jmt.mc.AbstractMigrationControllerExecuter.executeMigrationController(AbstractMigrationControllerExecuter.java:401)
at com.sap.sdt.jmt.mc.AbstractMigrationControllerExecuter.execute(AbstractMigrationControllerExecuter.java:364)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.execute(MigrationToolImport.java:897)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.migrateEngineDataAndCfg(MigrationToolImport.java:834)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:472)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1224)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
Caused by: com.sap.sdt.jmt.MigrationException: <Localization failed: ResourceBundle='com.sap.sdt.jmt.MigrationToolResourceBundle', ID='icm.id002', Arguments: ['cluster_data/server/ID4392653/services']> : Can't find resource for bundle java.util.PropertyResourceBundle, key icm.id002
at com.sap.sdt.migration.icm.ICMDataController.migrateInstancePropertiesServer(ICMDataController.java:496)
at com.sap.sdt.migration.icm.ICMDataController.migrateEngineData(ICMDataController.java:265)
... 12 more
<<<<<<<<<<<<<<<<<<RUN_OFFLINE_MIGRATION_RDM_03.log>>>>>>>>>>>>>>>>>>>>>>>
Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:883) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.tools.procx.DefaultProcessAdapter.checkReturnCode(DefaultProcessAdapter.java:563) [Thread[main,5,main]]: Return code condition success evaluated to false for process java.exe for action RUN_MTI.
Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.j710.enginemigration.MtiProcessAdapter.run(MtiProcessAdapter.java:106) [Thread[main,5,main]]: Could not execute MTI process. See log files P:\upg\java\log\JMT_FRAMEWORK_RDM_03.OUT and P:\upg\java\log\JMT_FRAMEWORK_RDM_03.ERR.
Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.j2ee.tools.enginemigration.JMTMigrationProcessor.runMigration(JMTMigrationProcessor.java:396) [Thread[main,5,main]]: Error during migration of archive P:\upg\java\data\mig\DEPLOYARCHIVES\icm_migration.sda which has been extracted to directory P:\upg\java\migtool\icm_migration.
Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.j2ee.tools.enginemigration.JMTMigrationProcessor.runMigration(JMTMigrationProcessor.java:405) [Thread[main,5,main]]: Could not migrate some archives from migration list.
Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.j2ee.tools.enginemigration.JMTMigrationProcessor.runMigration(JMTMigrationProcessor.java:276) [Thread[main,5,main]]: Error while processing migration list P:\upg\java\data\mig\MIGRATIONAUSF.LST.
I didn't find anything related on OSS, so any thoughts would be very helpfull.
Thanks a lot,
Peter Vojtek
Hi all,
We're having problems when the users try to logon into Portal 7.3 to Webdynpro Java apps:
"RfcException: message: Select one of the installed languages Return code: RFC_SYS_EXCEPTION(3) error group: 103 key: RFC_ERROR_LOGON_FAILURE "
The users have language "ca_ES". The same users, with the same language, have no problems to logon into Portal 7.0... and the backend R/3 system is exactly the same, as this is the same WD Java app after the migration.
Any idea? Maybe we forgot to customize something in the JCOs?
Thx!
Miguel.
Dear Members
We have activated required components on ECC EHP5 side we installed lately, and deployed the required ESS packages to our 7.3 portal installation. The "Overview" page of ESS is the only component we found after deployment, and we have a problem with navigation.
Once we access the "Overview" page everything goes well, but when we try to navigate to specific ESS application (let's say personal profile), it doesnot work. In the IE we get javascript:void(0)
Please help.
Ashu Grover
Hello Experts,
Can some please help me with the steps - (Pre & Post) for doing a system refresh from Live to Test System.
I checked many documents. But not getting the correct one.
Thanks & Kind Regards,
Jelbin
Hello Experts,
We are upgrading NetWeaver Portal from 7.0 to 7.4. Currently we have Composite Applications (WD Java on top of MDM) developed and deployed in Cmposite Environment(CE). Those CE applications are federated with portal and are not part of current migration. We are planning to federate those applications to upgraded version of portal. My question is this:
"How would go for CE federated? Any document for the same would be great. If not, kindly suggest me the way forward to assess the impact of CE federated into NetWeaver portal 7.4?"
Please let me know if you guys need more input.
Note: CE version 7.2
Thanks & Regards,
Manoj
Hello Guys.
I´m finish the Production Upgrade the ERP EHP5 (SAP Netweaver 7.3) to EHP7 (SAP Netweaver 7.4), until thusday the funtion in the Portal for the aplication of ESS working fine in the Explorer 8. But now not working today only with the Internet Explorer 10.
The Enterprise Portal still working in version Netweaver 7.3.
The problem and the strange is in the Quality System the function of ESS working fine in the Internet Explorer 8 but Production System not.
Ido not know whatcould be happening.
Regards
Desirée
Hi Experts,
This is Kishore,
How to do kernel Upgrade in Hetrogeneous System,I mean to say My Centrol instance OS is Windows and My additional Instances are RHEL.
Please help me how to do this.
Thanks&Regards,
Kishore.
Hello,
i hope i've found the right forum for my question.
could anyone tell me how i could check if the sap r/3 enterprise system / bw-system is unicode or non-unicode?
hope someone can help me.
best regards
guenter
Hi to everyone,
I have a question to submit:
When sap will stop giving support to the portal 7.0.1?
Thanks
Hi All,
I am trying to edit an Iview by name "Status Overview" to appraisal but the changes are not saved but getting as named changed successfully as message.
It was even happening for few other iviews as well.
Please let me know what could be the reason for this issue and the solution.
Thanks®ards,
Bharanidharan S P M