Hi all,

I'm trying to upgrade our EP (Java only) from NW 7.0 to NW 7.4. We did a test on a POC server last Summer and it went fine.

Now, it's time to do real upgrade on our servers; of course, the old SUM version doesn't work anymore. I used MOPZ to generate new stack files, download the latest components and all.

Somehow, the SUM kept failing at step 5.5 - Preprocessing when it tries to Start shadow instance SCS.

The log only indicates that SUM tried to start the instance a 20 times (with 15-second pauses in between) so it gave up. The last part of the log shows

------------------------

Feb 11, 2014 1:50:36 PM [Info  ]: All retrieved instances : 3

Feb 11, 2014 1:50:36 PM [Info  ]: Correctly detected instance: 70 on host mydev

Feb 11, 2014 1:50:36 PM [Info  ]: Correctly detected instance: 2 on host mydev

Feb 11, 2014 1:50:36 PM [Info  ]: Correctly detected instance: 0 on host mydev

Feb 11, 2014 1:50:36 PM [Info  ]: Instance has status STOPPED.

Feb 11, 2014 1:50:36 PM [Info  ]: Starting instance number 2 on host mydev with timeout of 7200 seconds.

Feb 11, 2014 1:50:36 PM [Error ]: The maximum retry count (20) was reached.

Feb 11, 2014 1:50:36 PM [Error ]: The following problem has occurred during step execution: com.sap.sdt.util.diag.DiagException: Could not start SAP instance  with number 2.

Could not send the command to start the instance with number 2 on host mydev.

Error starting instance 2 on host mydev with timeout of 7200 seconds.

Errors while starting the instance.

javax.xml.ws.soap.SOAPFaultException: Invalid Credentials

--------------------------

The only SAP Note I found is 1937296 where it says you'd need the latest kernel. But I've already had the latest kernel.

What bothers me is "Invalid Credentials" --> which credentials?

I tried several different things. Reset the upgrade, cleaned up the SUM directory, re-start the upgrade from scratch several times. I've also tried to re-start the instance; even re-started the server a couple of times ... to no avail :-(

I also tried to run the sapstartsrv command line

## ../SUM/sdt/data/kernel/sapstartsrv pf=../../DPK_SCS02_mydev -D

and I'd get the error

--------------------

Could not open the ICU common library.

   The following files must be in the path described by

   the environment variable "LD_LIBRARY_PATH":

   libicuuc.so.50, libicudata.so.50, libicui18n.so.50 [/bas/741_REL/src/flat/nlsui0.c 1535] pid = 18978

LD_LIBRARY_PATH is currently set to /usr/sap/DPK/SYS/exe/run:/oracle/client/11x_64/instantclient  [/bas/741_REL/src/flat/nlsui0.c 1538] pid = 18978

--------------------

Any help and/or suggestion would be greatly appreciated.

Regards,

Dao

Hi Experts,

I am getting below error during the execution phase of NWDI Usage type installation + SP 09 update of the Portal 7.4 System.

"The following problem has occurred during step execution: com.sap.sdt.j2ee.tools.sdmmanagement.OperateSdmException: Could not set the time in seconds SDM server will wait J2EE server to start during deployment to 21600 seconds.".

The same system was earlier upgraded from 7.02 and old SDM folder still exists in /usr/sap/<SID>/J00 location.

The .sh scripts in this folder is pointing to old /usr/sap/JC<instance number>/SDM location.

The log generated in SDM folder says "SDM is integrated in JStartupFramework. No repository changing commands are possible.

Processing error. Return code: 4"

Kindly suggest, why SUM is still trying to use old SDM 7.02 to do the SP application...?

The new UsageType (NWDI) specific components got deployed and showing in Component list.

Kindly provide some information to proceed further to complete the patching.

Thanks & Best Rgds,

Kiran Sathyan.

Hi all,

I had a portal 7.0 and a SAP SRM 7.02 EHP2.

We were installed a new portal 7.4 and we have transported all content of our portal 7.0 to the portal 7.4.

In the portal we are calling a several webdynpro Abap (SRM 7.02) the wendynpro abap work correctly but the problem is with the visualization. For example with the style(color and shape) of tabs.

New portal:

Old portal:

I dont know what is the problema, Is necessarry the intallation some patch in portal or R3?

Please can you help us?

Thanks and best regards

Hello All,

    We are upgrading EP system from SAP NW 701 to SAP NW7.4. DB is SQL Server

During the upgrade, I'm struck up in the execution phase and I get the below error message.

ay 24, 2014 4:40:55 AM [Info  ]: Deployment message for component EP-APPS-EXT :

May 24, 2014 4:40:55 AM [Info  ]: Overal deployment message : Could not authenticate the given user with AS Java. Check that user and password are correct.

com.sap.engine.services.dc.api.AuthenticationException: [ERROR CODE DPL.DCAPI.1148] Could not establish connection to AS Java on [XXXXXX:52304]. Cannot authenticate the user. Wrong or missing security credentials (password) for principal [Administrator], or the specified principal has no permissions to perform JNDI related operations.

javax.naming.NoPermissionException: Exception during getInitialContext operation. Wrong security principal/credentials. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]

com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.

com.sap.engine.services.security.exceptions.BaseLoginException: Authentication did not succeed.

Administrator password has been changed in the middle after SUM was ready for the execution phase.

When I go to JAVA -> Reneter java passwords ,I'm 100% sure that I'm entering the correct password but still I'm being prompt for the valid password.

Did anyone has faced such issue? any suggestion please?

Thanks and Regards,

Vimalan

Hi All,

We are currently in  the process of upgrading SAP Portal 7.0 to 7.4.

I created custom theme based on standard SAP Tradeshow on our development system.

But Anytime I change system parameters like session timeout or cookie configuration e.g. setting it secure etc and provide a system restart, the theme is not behaving properly. No images are seen nor can we move around the portal.

When we provide a normal system restart w/o changing any system parameters, it works perfectly.

When I check the HTTp watch, it shows 404 error for the custom theme.

To summarise, only when system parameters are changed and restart is provided, custom theme behaves this way.

Importing and exporting theme gives no error and works fine. This happens on the environment where the theme is developed itself.

PFA attached screenshots.

Regards,

Deep Desai

Hello,

I'm planning the following upgrade for BW:

Source
Windows 2003 32bit
SAP BW 3.5
SQL Server 2000 32 bit

Target(New Server)
Windows 2008 R2
SAP NW7.4
SQL Server 2012 64bit

Steps :
1.Install SQL Server 2005 on the target system.
2.Install BW3.5 .
3.Restore Production Copy
4.Upgrade SQL Server 2005 32 bit to 2012 64 bit.
5.Upgrade BW to 7.x

(Collation: is not SQL_Latin1_General_CP850_BIN2)

I’m not sure that it’s possible to Upgrade SQL Server 2005 32 bit to 2012 64 bit directly.
Do you have any idea?

Thanks

Hello

We are upgrading Portal from 7.02 to 7.4 and stuck at the downtime/execution phase

JDK version........: 1.6.0_85 SAP AG

SUM version........: 1.0.11.8

Source release.....: 7.02

Target release.....: 7.40

ABAP stack present.: false

An error has occurred during the execution of the Delete remote bootstrap jars step with action execute. Service com.sap.sdt.j2ee.services.servicesimpl.RemoteExecutionService failed with the following message:

Could not execute command "\\passp1\sapmnt\SP1\SYS\exe\jvm\NTAMD64\sapjvm_6.1.071\sapjvm_6\bin\java.exe -cp \\passp1\sapmnt\SP1\SYS\global/sdtremote/sdt_trace.jar;\\passp1\sapmnt\SP1\SYS\global/sdtremote/sdt_util.jar;\\passp1\sapmnt\SP1\SYS\global/sdtremote/sdt_tools.jar;\\passp1\sapmnt\SP1\SYS\global/sdtremote/sap.com~tc~sec~csi.jar com.sap.sdt.tools.remote.SdtRemoteOperationsExecutor deleteBootstrapJars e:/usr/sap/SP1/J01 SWITCH_UPGRADE" on instance 1 on host as1sp1 using the sapcontrol web service at http://as1sp1:50113. Check if sapcontrol is running and the log file SUM_1415290308665.log in the sapcontrol work directory. In case of permissions issues, check SAP note 927637.

You can find more information in the files E:\CDs\SUM\SUM\sdt\log\SWITCH\DELETE-REMOTE-BOOTSTRAP-JARS_44.LOG and ProcessOverview.html.

Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:

SWITCH,execute,pre-component-deploy,delete-remote-bootstrap-jars,com.sap.sdt.j2ee.services.servicesimpl.RemoteExecutionService,class com.sap.sdt.tools.sapcontrolws.SapControlWsException

We have already tried the below:

1600846 - JSPM/SUM calls sapcontrol without

user credentials

1563660 - sapcontrol, <sid>adm authorization issues

(SUM) (we gave DEFAULT, NONE - nothing worked)

Gave full permisssion (everyone, sidadm, SAPServiceSID)

to sapmnt/saploc/ entire sap folder in BOTH primary and secondary

app servers.

Hi all,

I'm trying to upgrade our EP (Java only) from NW 7.0 to NW 7.4. We did a test on a POC server last Summer and it went fine.

Now, it's time to do real upgrade on our servers; of course, the old SUM version doesn't work anymore. I used MOPZ to generate new stack files, download the latest components and all.

Somehow, the SUM kept failing at step 5.5 - Preprocessing when it tries to Start shadow instance SCS.

The log only indicates that SUM tried to start the instance a 20 times (with 15-second pauses in between) so it gave up. The last part of the log shows

------------------------

Feb 11, 2014 1:50:36 PM [Info  ]: All retrieved instances : 3

Feb 11, 2014 1:50:36 PM [Info  ]: Correctly detected instance: 70 on host mydev

Feb 11, 2014 1:50:36 PM [Info  ]: Correctly detected instance: 2 on host mydev

Feb 11, 2014 1:50:36 PM [Info  ]: Correctly detected instance: 0 on host mydev

Feb 11, 2014 1:50:36 PM [Info  ]: Instance has status STOPPED.

Feb 11, 2014 1:50:36 PM [Info  ]: Starting instance number 2 on host mydev with timeout of 7200 seconds.

Feb 11, 2014 1:50:36 PM [Error ]: The maximum retry count (20) was reached.

Feb 11, 2014 1:50:36 PM [Error ]: The following problem has occurred during step execution: com.sap.sdt.util.diag.DiagException: Could not start SAP instance  with number 2.

Could not send the command to start the instance with number 2 on host mydev.

Error starting instance 2 on host mydev with timeout of 7200 seconds.

Errors while starting the instance.

javax.xml.ws.soap.SOAPFaultException: Invalid Credentials

--------------------------

The only SAP Note I found is 1937296 where it says you'd need the latest kernel. But I've already had the latest kernel.

What bothers me is "Invalid Credentials" --> which credentials?

I tried several different things. Reset the upgrade, cleaned up the SUM directory, re-start the upgrade from scratch several times. I've also tried to re-start the instance; even re-started the server a couple of times ... to no avail :-(

I also tried to run the sapstartsrv command line

## ../SUM/sdt/data/kernel/sapstartsrv pf=../../DPK_SCS02_mydev -D

and I'd get the error

--------------------

Could not open the ICU common library.

   The following files must be in the path described by

   the environment variable "LD_LIBRARY_PATH":

   libicuuc.so.50, libicudata.so.50, libicui18n.so.50 [/bas/741_REL/src/flat/nlsui0.c 1535] pid = 18978

LD_LIBRARY_PATH is currently set to /usr/sap/DPK/SYS/exe/run:/oracle/client/11x_64/instantclient  [/bas/741_REL/src/flat/nlsui0.c 1538] pid = 18978

--------------------

Any help and/or suggestion would be greatly appreciated.

Regards,

Dao

Dear All.

We are in the process of upgrade of SAP NW 7.01 to SAP NW7.3.

However we have several doubts:

How transport content of all objects as(Iviews, Pages, Workset, Roles) used in the portal old.(701) to portal 7.3?

I am checking the following link:

http://scn.sap.com/community/netweaver-portal/blog/2011/07/25/sap-netweaver-portal-73-top-10-lessons-learned-from-ramp-up-you-should-know-before-getting-started

In the point 5:

• Manual content transport: Due to restrictions in the export mechanism of SAP NetWeaver 7.0, you cannot simply export, transport and import content and related properties or configurations into a fresh new system (e.g. some KM services). Check the transport information in documentation for KM 7.0 and KM 7.3 for details on supported scenarios. SAP recommends running a thorough upgrade assessment with your consulting partner in order to make a profound decision.

My question is: This restrictions apply also for content that I want Migrate?

The client want a install new:

Point 5. New installation: During the ramp-up customers used this option to quickly build up a new system and gain the benefits of a clean fresh installation. This allows you to install the system with the leanest possible footprint. In addition you can get rid of old legacy content such as test applications or workarounds (that would be kept during an upgrade). This pure installation procedures are pretty straight forward. For details check the Installation Guides.

If this not is posible then, I should create newly this roles?

What is the best practice.

Thanks

Hi,

received below error during upgrade preparation.

        An error has occurred during the execution of the Verify signed content step.    

com.sap.security.digsig.SignedManifest.sapJniManifest(I[Ljava/lang/Object;)[Ljava/lang/Object;

VERIFY-SIGNED-CONTENT_03.LOG

The following problem has occurred during step execution: java.lang.UnsatisfiedLinkError: com.sap.security.digsig.SignedManifest.sapJniManifest(I[Ljava/lang/Object;)[Ljava/lang/Object;.

couldn't find any SAP notes. Any help would be appreciated. Thanks

Hi Experts,

Can any one give me Detailed Steps of how to Migrate from UME Data Source from Abap to Java, as the Ume Data Source is initally configured for Abap.

Regards,

Siva

Hello,

Maybe someone can help here since we are experiencing a severe problem.

Following error occurs:

An error has occurred during the execution of the RUN_OFFLINE_MIGRATION phase.

Error while processing migration list /data/inst/sap/SUM/T57a/java/data/mig/MIGRATIONAUSF.LST. Could not migrate some archives from migration list.Possible reason is Database is down.Check if database running Error during migration of archive /data/inst/sap/SUM/T57a/java/data/mig/DEPLOYARCHIVES/com.sap.security.migration.sda which has been extracted to directory /data/inst/sap/SUM/T57a/java/migtool/com.sap.security.migration.Possible reason is Database is down.Check if database running Could not execute MTI process. See log files /data/inst/sap/SUM/T57a/java/log/JMT_FRAMEWORK_RDM_01.OUT and /data/inst/sap/SUM/T57a/java/log/JMT_FRAMEWORK_RDM_01.ERR. Return code condition success evaluated to false for process java for action RUN_MTI.

Steps taken:

1) When we first ran into this problem a restore was done from the database and the filesystem to the beginning of the DONWTIME phase.

2) The original 7.02 instance was started.

3) The UME consistency check was run under user administration per sap note 1016283.

4) A repair was carried out,  no inconsistencies remained.

5) SUM upgrade restarted

6) During the migration of the sap.security.migration.sda package it generates an error causing the upgrade to stop.

Did anyone encounter the same problems during a portal upgrade?

Thanks for your response.

Toon

PS: We are on the latest SUM version 1.0 SP 7 Patch 2.

Dear All,

I have a HTML5 Application which hosted on SAP Enterprise Portal. My Application run only in the IE Standard mode, but Enterprise mode.

If the Enterprise mode is enabled, there was some rendering issue, where all the UI's are displayed in the left side

When ever i click my application url, Enterprise mode is automatically Enabled. i had to disable every time when i access my application.

I have two question.

1. Mostly Web Application must run on both the modes . why the application run only on Standard mode but enterprise mode?

     When i checked about the functionality of Enterprise mode, i came to know that if the application does not work on Standard mode, enabling      Enterprise mode make it work . if the application still not work, maintaining the application url in the compatablity view settings make it work.

2. I have found a way to disable the Enterprise mode from Group policy editor(gpedit.msc) and regedit.

     Is there any way we can disable permanently from Browser setting? not to involve group policy editor and register edit

Appreciate your reply.

Thanks ,

Dayalan

Hi ,

   we need to do customisation on the masthead application available in portal.  Now as   EP 7.3 no longer supports PAR files we were looking to download an EAR file of the  masthead application . We found the SAP  provded masthead appliction  in th efollowing location . 

Content Administartion --> Portal Content Management --> Portal Content (Tab) > Portal Applications> com.sap.portal.navigation.afp.masthead 

But henceforth we are unable to obtain  the EAR format from this applicaton . Some suggestion will be appreciated .

Thanks ,

       Sidd.

Hi, I am currently performing an Portal Upgrade from NW 7.0 to NW 7.4, and am stuck at Configuration phase

Its asking me to insert the DVD Type NW_JAVA, Desciption is NW Java Content DVD.

And below that its asking CD Type as J2EE-CD,J2EE-INST,JDMP.

Am I am not able to figure out which DVD needs to be given for the same.

Can someone help regarding the same?

DVD Required

Regards,

Lokent

Hi SAP experts,

i'm trying to upgrade our NW7.0 EP to NW7.3. Portal is running on WIndows 2008 R2 and MSSQL 2008, JVM6 patch 34. Downtime phase has failed with strange error:

Error while processing migration list P:\upg\java\data\mig\MIGRATIONAUSF.LST. Could not migrate some archives from migration list. Error during migration of archive P:\upg\java\data\mig\DEPLOYARCHIVES\icm_migration.sda which has been extracted to directory P:\upg\java\migtool\icm_migration. Could not execute MTI process. See log files P:\upg\java\log\JMT_FRAMEWORK_RDM_03.OUT and P:\upg\java\log\JMT_FRAMEWORK_RDM_03.ERR. Return code condition success evaluated to false for process java.exe for action RUN_MTI.

<<<<<<<<<<<<<<<<JMT_FRAMEWORK_RDM_03.OUT >>>>>>>>>>>>>>>>>>

#2.0#2011 11 25 17:10:04:811#+00#Error#com.sap.sdt.jmt.migrationtool.err#

###C000C0A8C01D00000000000677B5C22F###com.sap.sdt.jmt.migrationtool.err########Thread[main,5,main]#Plain##

com.sap.sdt.jmt.MigrationException: <Localization failed: ResourceBundle='com.sap.sdt.jmt.MigrationToolResourceBundle', ID='icm.id002', Arguments: ['cluster_data/server/ID4392653/services']> : Can't find resource for bundle java.util.PropertyResourceBundle, key icm.id002

                at com.sap.sdt.migration.icm.ICMDataController.migrateEngineData(ICMDataController.java:273)

                at com.sap.sdt.jmt.mc.EngineDataMigrationExecuter.executeController(EngineDataMigrationExecuter.java:70)

                at com.sap.sdt.jmt.mc.AbstractMigrationControllerExecuter.executeMigrationController(AbstractMigrationControllerExecuter.java:401)

                at com.sap.sdt.jmt.mc.AbstractMigrationControllerExecuter.execute(AbstractMigrationControllerExecuter.java:364)

                at com.sap.sdt.jmt.migrationtool.MigrationToolImport.execute(MigrationToolImport.java:897)

                at com.sap.sdt.jmt.migrationtool.MigrationToolImport.migrateEngineDataAndCfg(MigrationToolImport.java:834)

                at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:472)

                at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1224)

                at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

                at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

                at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

                at java.lang.reflect.Method.invoke(Method.java:597)

                at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)

Caused by: com.sap.sdt.jmt.MigrationException: <Localization failed: ResourceBundle='com.sap.sdt.jmt.MigrationToolResourceBundle', ID='icm.id002', Arguments: ['cluster_data/server/ID4392653/services']> : Can't find resource for bundle java.util.PropertyResourceBundle, key icm.id002

                at com.sap.sdt.migration.icm.ICMDataController.migrateInstancePropertiesServer(ICMDataController.java:496)

                at com.sap.sdt.migration.icm.ICMDataController.migrateEngineData(ICMDataController.java:265)

                ... 12 more

<<<<<<<<<<<<<<<<<<RUN_OFFLINE_MIGRATION_RDM_03.log>>>>>>>>>>>>>>>>>>>>>>>

Nov 25, 2011 5:10:55 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:883) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.

Nov 25, 2011 5:10:55 PM [Error]:        com.sap.sdt.tools.procx.DefaultProcessAdapter.checkReturnCode(DefaultProcessAdapter.java:563) [Thread[main,5,main]]: Return code condition success evaluated to false for process java.exe for action RUN_MTI.

Nov 25, 2011 5:10:55 PM [Error]:                   com.sap.sdt.j710.enginemigration.MtiProcessAdapter.run(MtiProcessAdapter.java:106) [Thread[main,5,main]]: Could not execute MTI process. See log files P:\upg\java\log\JMT_FRAMEWORK_RDM_03.OUT and P:\upg\java\log\JMT_FRAMEWORK_RDM_03.ERR.

Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.j2ee.tools.enginemigration.JMTMigrationProcessor.runMigration(JMTMigrationProcessor.java:396) [Thread[main,5,main]]: Error during migration of archive P:\upg\java\data\mig\DEPLOYARCHIVES\icm_migration.sda which has been extracted to directory P:\upg\java\migtool\icm_migration.

Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.j2ee.tools.enginemigration.JMTMigrationProcessor.runMigration(JMTMigrationProcessor.java:405) [Thread[main,5,main]]: Could not migrate some archives from migration list.

Nov 25, 2011 5:10:55 PM [Error]: com.sap.sdt.j2ee.tools.enginemigration.JMTMigrationProcessor.runMigration(JMTMigrationProcessor.java:276) [Thread[main,5,main]]: Error while processing migration list P:\upg\java\data\mig\MIGRATIONAUSF.LST.

I didn't find anything related on OSS, so any thoughts would be very helpfull.

Thanks a lot,

Peter Vojtek

Hi All,

We have upgraded our ECC from ehp 5 to ehp7 and installed a new portal 7.31.

I have applied custom theme in portal which is working fine.

But this theme does not apply to WDA(Standard like ESS, MSS and custom) as after upgrade ECC is using sap corbu theme so background color is grey and font is also very different.

We tried changing the stylesheet(downloading ie6 file and changing it and again uploading it) at ECC side but we were getting many dump. So reverted it.

Please let me know whow can we make the look and feel of WDA same as portal theme.

Thanks,

Seema

Dear All,

While upgrading our BI system using SUM i am getting missing support packages error for RTLPOSDM component.

Our current BI_CONT version is 703 patch 09. i want to upgrade to version 707. I raised message with SAP and get

suggested to include RTLPOSDM 100 700 content in mopz in add on selection phase. but i have not found any add

on's related to this component in MOPZ. And also SAP suggested to select RTLPOSDM in addon_dyn phase but

i didn't get this phase. Please help me to resolve this issue.

Recently upgraded EP from NW 7.0 to Nw 7.4. Now users are not able to open attachments in UWL work item. Where as attachments are visible both in preview and work item in new window

when the item is opened, attachments are opening from preview but not in the item. When the attachment in the item is clicked it is opening a blank window with url http:/xxx.xxx.xxx:5IN00/com.sap.portal.navigation.helperservice/html/child.html.

Hi SCN,

I've got a bit of a nasty problem during an upgrade.

System is running on enterprise linux 6 and with a Oracle DB 11.2.0.3

According to MOPZ:

Source release:

Target Release:

The upgrade didn't get any farther than the calculation of the queue and then it stopped mentioning that it was missing files for RTLPOSDM to be able to calculate the queue.

Since BI_CONT was on a reasonably old version (and still with the RTLPOSDM packages included in BI_CONT) I decided to upgrade to BI_CONT 707 and RTLPOSDM 100_700. AFfer installing this, this is now the source release.

SBOP PC 7.5 FOR SAP NW    SP Stack 01 (Add-on)

SAP POS DM 1.0 (Add-on)

SAP EHP1 FOR SAP NETWEAVER 7.0   11 (03/2012) (Netweaver)

When running MOPZ now I do get the following warnings, which are worrying me slightly :-)

Has anyone else come across this problem or any experience in upgrading from NW 7.0 EHP1 to NW 7.4? I've done an upgrade from a BW 7 Ehp1 to BW 7.3 Ehp1 in the past .But there was no RTLPOSDM component (logically since it was not a retail customer)

Thanks in advance for your help/tips/suggestions.

Dieter